FLH Fuse Panel

"Add-a-circuit" installed on 2008 FLH's fuse panel

Dual pigtail "add-a-circuit"

Adding two +12V fused circuits using the "add-a-circuit" fuse tap.

H-D ECM readings with LC-1 AFR readings

A display of the HD OBDII data displayed against the LC-1 AFR reading as displayed by Log Works.

Remove the Rear OEM O2 sensor

Remove the narrow band O2 sensor before installing the wide band sensor

Fuse Panel is under the left side panel.

Fuse panel showing the "add-a-circuit" installed in the FLH fuse panel

Front pipe O2 sensor location

Remove front O2 sensor

Remove the front O2 IED sensor with the supplied Wide Band O2 sensor.

flh_121207_006.JPG

Rear O2 sensor wiring placement

flh_121207_008.JPG

flh_121207_009.JPG

Front LC-1 Location

Tie wrap the front LC-1 on the front frame rail.

flh_121207_012.JPG

Front LC-1 placement

OEM Wiring Harness adapter

O2 sensor wiring connected.

Connect the Nightrider O2 sensor wiring harness adapter to the output link of the O2 sensor.

flh_121207_018.JPG

flh_121207_020.JPG